KHUSUS

Due to the flexibility of the internal and external reflector, the LED 6470/5 pendant light fitting can take care of any lighting task. The cleverly designed combination of electronic driver and high-performance LED guarantees a long service life, high efficiency and enables use in the input voltage range of 100 V to 277 V AC.The universal cover with integrated fixing holes enables pendant and ceiling mounting. Another cover enables pole and wall mounting.Lampu Explosion Proof

The LED 6125 floodlight is ideal for lighting up areas from greater mounting heights. Three different light distribution types enable adjustment to fulfil the lighting task. The long service life of the highly efficient LEDs reduces energy and maintenance costs. This means that the floodlight can also be mounted in locations that are difficult to access. For normal application areas, the floodlight is designed with a single powder coating and a bracket made from single-coated sheet steel. There is also a variant with a double powder coating and double-coated bracket made of stainless steel 316L specifically for offshore areas.Lampu Explosion Proof

> Floodlight for helideck landing areas > For use in hazardous areas > Floodlighting > Rugged and low profile floodlight made from marine proofed aluminium > Sealed for life > Simple to install and maintain > Light module is maintenance free > Proven degree of protection > Resistant to vibrations > Complies with: ICAO Annex 14 Vol. II; CAP437; NORSOK C-004 2013 Lampu Helidek

New WaveTrac™ technology reduces power consumption up to 80% compared to incandescentSupports universal power supply found in PRO APF in-pavement fixtures for minimized supply stock-40°C to +55°C operating temperatureInnovative design for ease of installation and maintenanceRemovable nut secures glass dome to housing, allows for quick access to power supply and LED optical assemblyBuilt-in leveling bosses accept standard circular bubble levelThree screw leveling with hex head boltsAvailable in installed heights of 14 inches (350mm), 24 inches (607mm) and 30 inches (759mm)Compatible with 1.5" and 2" frangible couplingsLong life LED technology with rated projected life greater than 50,000 hours at 6.6AHighly durable cast aluminum housing painted yellow5-step constant current operationExternal power cord and ground option for non-FAA compatibilityArctic kit option availableEnergy-efficient arctic kit utilizes filament applied directly to the glass dome to minimize energy lossesFrangible coupling with integral fluid barrier to prevent ambient precipitation from entering baseLED and electronics housed in IP67 rated assemblyRoHS compliant (except column)Typical fixture in-rush voltage of 1.5V Lampu LED

The CHLITE system provides an illuminated circle and H on the helicopter deck, corresponding to the existing helideck markers. The light elements inclusive the mounting plates are extremely thin (22 mm) for over-the-deck surface mounting and resistant to harsh environment and helicopter loads. The CHLITE system from Tranberg is fully compliant with CAP437, 7th Edition and confirmed by the Helicopter Certification Agency (HCA). The system guarantees a regular light element spacing, free from any junction boxes for the on deck mounting. The system is maintenance/inspection free. A double independent power supply circuit and LED bypass devices ensure, that a failure of a single LED has only a local effect. Cable routings on and under deck makes the system really flexible. If you want to upgrade your existing helideck or you need a complete new installation - this system will provide the perfect solution for your project!Factory sealed LED lighting elementEasy to install: minimized installation and shut down time for the helideckExtremely low profile (22 mm), under the required specificationsVersatile installation: Cable routing above deck or below deckAnti-slip polysiloxane system coated stainless steel and high impact resistant composite PC provide a corrosion free solution for all decksAnti-slip surfaceNo junction boxes on the surface of the helideckLow power consumptionHigh reliability - maintenance free for all „on“ deck componentsCAP437 Compliant 7th Edition with Amendment Lampu Helipad

Lumascape’s INCAND-AIR 120 is a high power LED based downlight system designed to replace 300W Incandescent Par 56 luminaires. INCAND-AIR 120 features a specifically developed LED light engine based on a highly tuned array of Red, Green, Blue, White and Amber Luxeon LEDs. The INCAND-AIR 120 is capable of producing beautiful, high CRI whites of any CCT and accurately replicates the colour temperature shift that is characteristic of halogen lamps when dimmed. The use of RGBWA gives the added benefit of an ability to produce not only excellent whites, but rich, vivid colours. INCAND-AIR 120 achieves outstanding, totally smooth dimming performance from 100% to black. This is accomplished by the use of an Adaptive Resolution Pulse Width Modulation dimming method. This ensures that colours remain consistent and controllable at all levels, which is critical for the accurate control of colour temperature during dimming. All luminaires across the installation dim smoothly to the same level and colour temperature. They dim at the same rate and finally fade to black at the same time, with no flicker or step change to off. Light output and LED life have been maximised through the employment of a highly effective thermal management system. The junction temperatures of the LEDs are maintained at a level low enough to provide 70% Lumen maintenance after 50,000 hours. The application of effective passive cooling, and the use of heatpipes results in a luminaire that does not generate any fan noise, or fan related maintenance issues. Reliability is further increased by the remote location of the LED Driver and Power Supply. This removes the heatload of the LEDs from the power system, and the heat load of the Power System for the LED array. As an added benefit, the power system can be installed in a safe, easy to access remote location, allowing servicing without the need to access the LED Light Heads themselves. Should a situation occur where the temperature of the LEDs increases to a point where the usable life of the LEDs is threatened, the AIRLED will take steps to maintain the temperature at a normal operating level, while alerting the monitoring system of the issue through DMX-RDM Lampu Downlight

Features:AIR- Adaptive Resolution provides intimate and accurate control of the light output from the LEDs thus ensuring smooth dimming performance over the entire dimming range. Multiple control modes including adaptive resolution dimming of individual colours channels for full control of custom colours and fades. Incandescent Mode Replicates the colour temperature shift that is characteristic of Halogen lamps when dimmed. Temperature and fault monitoring feedback. Local thermal fold-back. Effective, considered thermal management for LED longevity and reliability. Resistant to power fluctuations. CE and C-Tick compliant Perfectly smooth dimming from 100% to Black. Digital AIR dimming ensures all luminaires across the installation fade to black smoothly, at the same time Lampu Downlight

ETL certifiedLow profile, <0.25" (6mm) – FAA Style 3High strength aluminum optical assemblyEasy to maintain – no sealant required for prism or through feed assembly replacementPressure test plug for seal integrity verificationExternal ground screwLong life LEDDirect replacement on existing circuitComplies with intensity curve requirements for 3-step or 5-step circuits, 50/60 HzIt is recommended that caution be used during snowplow operations; use of a rubber tipped blade is recommended; fixture is not warranted against snowplow damageNon-arctic kit – max. fixture load 9.2W, 11.2VA, PF=0.82, isolation transformer required 10/15WArctic kit – max. fixture load 39.9W, 40.9VA, PF=0.98, isolation transformer required 30/45W Lampu LED

ETL certifiedNew Wavetrac™ technology reduces power consumption up to 80% compared to incandescentLong life LED technology with rated projected life greater than 50,000h at 6.6 ADust and watertight to IP68Modular design makes fixtures easy to maintain with fewer parts to stockEngineering Brief 67 current edition compliant dimming curveHigh frequency 400 Hz PWM helps eliminate flicker perceptionCompatible with all known CCR types3.5 Crest factor ensures compatibility with Series CCRs10kV/5kA surge protection-40°C to +85°C operating temperature ensures safe movement of aircraft in the most challenging locationsFailure monitoring of fixtures0.88 second switch-on timeIEC Style 3, 6-13mm low protusion housingLow profile, <.25" (6.35mm) – FAA Style 3Optional arctic kit (patent pending) Lampu LED

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, compact, all stainless steelThis sight glass luminaire is designed for universal applications. It is ideal for use in combined sight and light ports (single-flange version) or for two separate ports (2-flange version).Application in chemical, pharmaceutical, biogas and food processing industries: It is ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of tanks, agitators, separators, pipelines and other, usually closed, vessels in non-explosive operating environments.Suits all Lumiglas Sight Glass Fittings from size DN 25 Operating voltage/power: 12V, 24V, 120V / 20W, 50WSecured by hinged bracketCompact design, powerful light output:Glare-free illumination; suitable for circular sight glass fittings to DIN 28120/DIN 28121 or similar, for screw-type sight glass fittings in compliance with DIN 11851, and for METAGLAS® and BioControl fittings.Protection class: Dust- and waterjet proof, IP 65 according to EN 60 529 / DIN VDE 0470, Part 1Max. admissible ambient temperature at the cable entry gland with Halogen version: 90°C; with LED version: 40°CUSL 13: The luminaire is attached to the cover flange of the circular sight glass fitting or the visual flow indicator with a hinged bracket, or fastened to the grooved nut on screw-type sight glass fittings. USL 33: The luminaire is mounted over an adapter collar.lampu industri